TX-S20S
Drill bit re-sharpener
This machine is an upgraded version of S20.
It adopts double-head grinding structure, which can be divided into two grindings for coarse and fine grinding to improve the smoothness and precision and increase the life of the drill.
Equipped with brushless motor, it significantly improves the stability and power, and the service life is 3~5 times that of ordinary motor.
Model | TX-S20S |
Grinding diameter | 3-20mm |
Point angle | 130° |
Power | AC 220V |
Motor | 180W/3000-6000rpm |
Grinding wheel | CBN or SDC |
Dimension | 50x34x22cm |
N.W. | 21kg |
| |
Note: Standard collet: 18 pieces; standard wheel: CBN. | |
It is not easy to align below 3mm. | |
Recommended Products
-
CK50Swing over bed 500mm
Workpiece length 500mm
-
TX-X4Cutting off machine
Grinding diameter 4-14mm
Motor 180W
-
QK1313,QK1319,QK1322Swing over bed 630-800mm
Spindle bore 130-225mm
-
CK40L,CK50LSwing over bed 400-500mm
Workpiece length 500-750mm
-
VMC855Travel X/Y/Z axis 800/550/550mm
Worktable size 1000x550mm
-
TX-G13Drill bit re-sharpener
Grinding diameter 4-14mm
Motor 120W
-
BS-280GCutting 90° (Round) 220mm
Cutting 90° (Square) 250x155mm
-
Medium Live CenterMT1-4
Max. speed 5000rpm
-
CK6140SSwing over bed 400mm
Workpiece length 1000mm
-
LTT-50Boring diameter 260mm
Spindle speed 200rpm
-
SGA30100AH,SGA30100AHR,SGA30100AHDTable size 305x1020mm
Travel X axis 1130mm
-
SVB650Travel X/Y/Z axis 650/400/500mm
Worktable size 850x400mm
-
CW6263A,CW6280ASwing over bed 630/800mm
Workpiece length 4000mm
Spindle bore 105mm
Spindle speed 7.5-1000rpm
-
W11H3 roller hydraulic arc adjust plate rolling machine
Working length 2000-4000mm
Plate thickness 4-35mm
-
DDP-M-0.5,DDP-M-1,DDP-M-2,DDP-M-3,DDP-M-4,DDP-M-5Pressure force 0.5-5t
What product are you looking for?
Feel free to check our products, it would be our pleasure if some of them happen to be just as you want them to be.
-
- WhatsApp/WeChat
- Stone Wu+8618663621683
-
Stone Wu
