This series of machine is suitable for machining in various industries and can be used for rough and finish machining of internal and external cylindrical surfaces, conical surfaces, end faces, grooving etc.
The main drive of the machine is AC motor driven and the speed range of the table is achieved through a 16-step or 4-step spindle speed change mechanism.
The table spindle is centred on a high-precision, adjustable, double-row, short cylindrical roller bearing with the same radial clearance. The axial direction uses a constant flow static pressure guide, which gives the table high rotational accuracy, high load carrying capacity and low thermal deformation.
The machine can be equipped with a constant temperature cooling system according to the customer's needs. The machine can be equipped with an independent hydraulic station system to ensure the machine's machining accuracy and the stability of various technical indicators.
The guideway surfaces of the column, crossbeam and vertical ram are finely ground. High precision and good technical support.
The PLC control system is used for the machine's electrical equipment, thus ensuring stable and reliable electrical quality.
The ram has been replaced by a square ram with large cross-sectional dimensions and good steel properties. The upper surface of the cross beam and the contact surface of the rollers are made of steel.
Specifications | C5225 | C5232 | C5240x32 | C5240x40 | C5250x40 | C5250x65 | C5250Sx80 | C5257 |
Max. turning diameter | 2500mm | 3200mm | 4000mm | 4000mm | 5000mm | 5000mm | 5000mm | 5700mm |
Table diameter | 2250mm | 2500mm | 2830mm | 3200mm | 4000mm | 4500mm | 4500mm | 5000mm |
Max. height of workpiece | 1600/2000mm | 2000/2500mm | 2000/2500mm | 2000/2500mm | 2500/3150mm | 2500/3150mm | 3150/4000mm | 2500/3150mm |
Max. work piece weight | 20t | 20t | 20t | 32t | 40t | 65t | 80t | 65t |
Worktable max torque | 63kN.m | 63kN.m | 63kN.m | 70kN.m | 80kN.m | 100kN.m | 150kN.m | 100kN.m |
Worktable range of speed (16 steps) | 2-63r/min | 2-63r/min | 2-63r/min | 0.42-42r/min | 0.42-42r/min | 0.42-42r/min | 0.42-42r/min | 0.42-42r/min |
Max. cutting force vertical toolpost | 30kN | 35kN | 35kN | 40kN | 50kN | 60kN | 63kN | 60kN |
Swivel of vertical toolpost | ±30° | ±30° | ±30° | ±30° | ±30° | ±30° | ±30° | ±30° |
Tool post range of feeds (12 steps) | 0.2-145mm/min | 0.2-145mm/min | 0.2-145mm/min | 0.2-145mm/min | 0.2-145mm/min | 0.2-145mm/min | 0.2-145mm/min | 0.2-145mm/min |
Horizontal throw of Vertical toolpost | 1400mm | 1750mm | 2150mm | 2150mm | 2765mm | 2765mm | 2765mm | 3000mm |
Horizontal throw of ram toolpost | 1000mm | 1250mm | 1250mm | 1250mm | 1250/1600mm | 1250/1600mm | 1600/2000mm | 1250/1600mm |
Tool post quick travel speed | 1550mm/min | 1550mm/min | 1550mm/min | 1550mm/min | 1550mm/min | 1550mm/min | 2500mm/min | 1550mm/min |
Section dimension of tool bar (W*H) | 40x50mm | 40x50mm | 40x50mm | 50x50mm | 50x50mm | 50x50mm | 50x50mm | 50x50mm |
Power of main motor | 55kW | 55kW | 55kW | 75kW | 75kW | 90kW | 90kW | 90kW |
Overall dimensions (L*W*H) | 5400x4700x4800/5200mm | 6100x4800x5200/5700mm | 6900x5100x6400/6900mm | 6900x5500x6400/6900mm | 10000x6500x7100/8400mm | 10000x7000x7230/8530mm | 10000x7000x9400/10700mm | 10700x7500x7230/8530mm |
Weight of machine (Approx.) | 34/36t | 38/40t | 44/46t | 51/52t | 64/66t | 81/84t | 118/122t | 85/89t |
Recommended Products
Swing over bed 500mm
Workpiece length 500mm
Cutting off machine
Grinding diameter 4-14mm
Motor 180W
Swing over bed 630-800mm
Spindle bore 130-225mm
Swing over bed 400-500mm
Workpiece length 500-750mm
Travel X/Y/Z axis 800/550/550mm
Worktable size 1000x550mm
Drill bit re-sharpener
Grinding diameter 4-14mm
Motor 120W
Cutting 90° (Round) 220mm
Cutting 90° (Square) 250x155mm
MT1-4
Max. speed 5000rpm
Swing over bed 400mm
Workpiece length 1000mm
Boring diameter 260mm
Spindle speed 200rpm
Table size 305x1020mm
Travel X axis 1130mm
Travel X/Y/Z axis 650/400/500mm
Worktable size 850x400mm
Swing over bed 630/800mm
Workpiece length 4000mm
Spindle bore 105mm
Spindle speed 7.5-1000rpm
3 roller hydraulic arc adjust plate rolling machine
Working length 2000-4000mm
Plate thickness 4-35mm
Pressure force 0.5-5t
What product are you looking for?
Feel free to check our products, it would be our pleasure if some of them happen to be just as you want them to be.
Here We Are
Qingzhou Shengmao Machinery Co., Ltd.
South Hedong Village,
Yidu Subdistrict, Qingzhou City, Shandong Province, China 262500
© 2024 Qingzhou Shengmao Machinery Co., Ltd. All rights reserved