3 roller hydraulic arc adjust plate rolling machine
The machine has a pre-bending function, can feed the plate at once, no need to turn around to complete the pre-bending and rolling calibration round. The machine three rolls are the main drive axis, the upper roll position is fixed, the two bottom rolls around a fixed rotation centre for arc lifting movement, the two bottom rolls can be raised and lowered separately or with the same rise and fall. The rotation and lifting movement of the main rolls are driven by hydraulic pressure, lifting displacement screen display.
Performance features.
Italian technology.
Movable operating table for easy operation.
Touch screen display of the displacement of the two lower rollers, high precision of the roll.
Two bottom rolls are lifted in an arc, with leverage to increase the forming force.
Three working rollers are all main drive rollers, good feeding and rolling function for any thickness of material.
The plate is always clamped during the rolling process, so that it does not slide and run off.
Three working rolls with the same roll diameter.
Three rolls that can be close together, enabling small barrel diameter coiling and rounding.
Self-contained roll cone device.
Model | Pre- bending thickness | Plate yield limit | Plate width | Plate thickness | Roller diameter | Rolling speed | Main motor |
mm | MPa | mm | mm | mm | m/min | kW | |
W11H-6X2000 | 4 | 245 | 500 | 160 | 5.2 | 5.5 | |
W11H-4X2500 | 2 | 245 | 500 | 160 | 5.2 | 5.5 | |
W11H-8X2000 | 5 | 245 | 550 | 190 | 5 | 5.5 | |
W11H-6X2500 | 4 | 245 | 550 | 190 | 5 | 5.5 | |
W11H-12X2000 | 8 | 245 | 600 | 230 | 5 | 5.5 | |
W11H-8X2500 | 5 | 245 | 600 | 230 | 5 | 5.5 | |
W11H-16X2000 | 12 | 245 | 700 | 270 | 4.5 | 7.5 | |
W11H-12X2500 | 8 | 245 | 700 | 270 | 4.5 | 7.5 | |
W11H-8X3200 | 6 | 245 | 700 | 270 | 4.5 | 7.5 | |
W11H-20X2000 | 14 | 245 | 800 | 300 | 5 | 18.5 | |
W11H-16X2500 | 12 | 245 | 800 | 300 | 5 | 18.5 | |
W11H-12X3200 | 8 | 245 | 800 | 300 | 5 | 18.5 | |
W11H-25X2000 | 20 | 245 | 1100 | 330 | 4 | 18.5 | |
W11H-20X2500 | 14 | 245 | 1100 | 330 | 4 | 18.5 | |
W11H-16X3200 | 12 | 245 | 1100 | 330 | 4 | 18.5 | |
W11H-25X2000 | 20 | 245 | 800 | 330 | 5 | 18.5 | |
W11H-20X3200 | 14 | 245 | 800 | 330 | 5 | 18.5 | |
W11H-16X4000 | 12 | 245 | 800 | 380 | 5 | 18.5 | |
W11H-32X2000 | 25 | 245 | 1300 | 360 | 4 | 22 | |
W11H-25X3200 | 20 | 245 | 1300 | 420 | 4 | 22 | |
W11H-20X4000 | 14 | 245 | 1300 | 420 | 4 | 22 | |
W11H-35X2500 | 25 | 245 | 1500 | 460 | 4 | 30 |
Standard Accessories | Optional Accessories |
Electric cabinet | Cone bending device |
Hydraulic cylinder for lateral rolls | Polished rolls |
Hydraulic station | |
Limit switch | |
Movable control panel | |
Solid rolls | |
Hydraulic drop end |
Recommended Products
Swing over bed 500mm
Workpiece length 500mm
Cutting off machine
Grinding diameter 4-14mm
Motor 180W
Swing over bed 630-800mm
Spindle bore 130-225mm
Swing over bed 400-500mm
Workpiece length 500-750mm
Travel X/Y/Z axis 800/550/550mm
Worktable size 1000x550mm
Drill bit re-sharpener
Grinding diameter 4-14mm
Motor 120W
Cutting 90° (Round) 220mm
Cutting 90° (Square) 250x155mm
MT1-4
Max. speed 5000rpm
Swing over bed 400mm
Workpiece length 1000mm
Boring diameter 260mm
Spindle speed 200rpm
Table size 305x1020mm
Travel X axis 1130mm
Travel X/Y/Z axis 650/400/500mm
Worktable size 850x400mm
Swing over bed 630/800mm
Workpiece length 4000mm
Spindle bore 105mm
Spindle speed 7.5-1000rpm
3 roller hydraulic arc adjust plate rolling machine
Working length 2000-4000mm
Plate thickness 4-35mm
Pressure force 0.5-5t
What product are you looking for?
Feel free to check our products, it would be our pleasure if some of them happen to be just as you want them to be.
Here We Are
Qingzhou Shengmao Machinery Co., Ltd.
South Hedong Village,
Yidu Subdistrict, Qingzhou City, Shandong Province, China 262500
© 2024 Qingzhou Shengmao Machinery Co., Ltd. All rights reserved