TX-G13
Drill bit re-sharpener
This machine is portable, accurate and durable, equipped with diamond grinding wheel made in Taiwan. Designed for grinding powder metallurgy drills, the G13 is capable of sharpening the tip end angle (apex angle), the center flute, and the back bevel. The tip end angle of the drill bit and the center flute are adjustable.
Model | TX-G13 |
Grinding diameter | 4-14mm |
Point angle | 130° |
Power | AC 220V |
Motor | 120W/4800rpm |
Grinding wheel | CBN or SDC |
Dimension | 33x18x20cm |
N.W. | 17kg |
| |
Suitable for NACHI 7572P, etc. | |
Recommended Products
-
GER Key Drill ChuckRange 1-20mm
Taper B/JT
-
PMBACutter dia. 12-50mm
-
Q1338Swing over bed 1000mm
Spindle bore 390mm
-
QK1325,QK1327CSwing over bed 800mm
Spindle bore 255-280mm
-
Q11Shear thickness 3-3.5mm
Shear width 1200-1500mm
-
C0636DSwing over bed 360mm
Workpiece length 1000mm
Spindle bore 52mm
Spindle speed 70-2000rpm
-
RBM40HVRoller diameter 40mm
Spindle speed 9.3rpm
-
Half Notched CenterMT1-6
Accuracy 0.005mm
-
CM6241,CM6241VSwing over bed 410mm
Workpiece length 1500mm
Spindle bore 52mm
Spindle speed 45-1800rpm
-
SC Collet ChuckBT/NT-SC
-
GT Tapping ColletGT3/12/24
-
JSN Tapping ChuckJSN7/12/20
-
OZ Collet ChuckNT/MT/R8/BT-OZ
-
CKM6-30
-
Corner Rounding4/8Pcs
What product are you looking for?
Feel free to check our products, it would be our pleasure if some of them happen to be just as you want them to be.
-
- WhatsApp/WeChat
- Stone Wu+8618663621683
-
Stone Wu
