TX-Z13
Drill bit re-sharpener
This machine is portable, accurate and durable, equipped with diamond grinding wheel made in Taiwan.
It can sharpen the tip angle (apex angle), front cutting edge (positive rake angle), chip flute (rear angle), and the size of the center transverse blade can be adjusted easier.
Z32 is a compound drill grinding machine (left and right double-head grinding work).
Model | TX-Z13/Z13D | TX-Z20 | TX-Z26 | TX-Z32 |
Grinding diameter | 3-13/14mm | 3-20mm | 13-26/32mm | 3-32mm |
Point angle | 90°-140° | 95°-140° | 95°-140° | 90°-140°/95°-140° |
Power | AC 220V±10% | AC 220V±10% | AC 220V±10% | AC 220V±10% |
Motor | 120W/4800rpm | 180W/4800rpm | 250W/4400rpm | 250W/4400rpm |
Dimension | 36x21x19cm | 43x22x21cm | 43x23x21cm | 42x27x34cm |
N.W. | 9kg | 14kg | 25kg | 29kg |
| ||||
Note: Standard collet Z13/Z13D type: 11 pieces; Z20 type: 18 pieces; Z26 type: 13 pieces; Z32 type: 30 pieces. | ||||
It is not easy to align below 3mm. | ||||
Recommended Products
-
RB13,RB14Drilling diameter 13mm
Motor power 300W
Table size 330x190mm
Height 610/668mm
-
HQ400/3A,HQ400/3LSwing over bed 420mm
Workpiece length 400/500mm
Spindle bore 20mm
Drilling dia. 15mm
-
JYP250VSwing over bed 250mm
Workpiece length 550/750mm
Spindle bore 26mm
Drilling dia. 16mm
-
CD6240B,CD6250B,CD6260B,CD6266BSwing over bed 410-660mm
Workpiece length 3000mm
Spindle bore 65mm
Spindle speed 22-1800rpm
-
CJ6250YC,CJ6256YC,CJ6266YC,CJ6280YCSwing over bed 500-800mm
Workpiece length 4000mm
Spindle bore 105mm
Spindle speed 36-1600rpm
-
T-Slot indexableCutter dia. 25-72mm
-
C6266YSwing over bed 660mm
Workpiece length 4000mm
Spindle bore 103mm
Spindle speed 9-1275rpm
-
C6240ZK,C6246ZKSwing over bed 400/460mm
Workpiece length 1500mm
Spindle bore 52mm
Spindle speed 40-1800pm
-
C6280Y,C62100YSwing over bed 800/1000mm
Workpiece length 4000mm
Spindle bore 103mm
Spindle speed 9-1275rpm
-
C6240ZX,C6246ZXSwing over bed 400/460mm
Workpiece length 2000mm
Spindle bore 80mm
Spindle speed 25-1800pm
-
C6140WSwing over bed 420mm
Workpiece length 2000mm
Spindle bore 56mm
Spindle speed 9-1600pm
-
C6250ASwing over bed 500mm
Workpiece length 3000mm
Spindle bore 80mm
Spindle speed 36-1600pm
-
C6253,C6260,C6266Swing over bed 530-660mm
Workpiece length 1500/2000mm
Spindle bore 82mm
Spindle speed 20-1600rpm
-
C6241,C6246Swing over bed 410/460mm
Workpiece length 1000/1500mm
Spindle bore 58/82mm
Spindle speed 25-2000rpm
-
GH4280,GH42100Cutting 90° (Round) 800mm
Cutting 90° (Square) 800x800mm
What product are you looking for?
Feel free to check our products, it would be our pleasure if some of them happen to be just as you want them to be.
-
- WhatsApp/WeChat
- Stone Wu+8618663621683
-
Stone Wu
