C6266Y

Engine Lathe

The surface of the bedways is supersonic frequency hardened and precision grinding.
The headstock gears are quenched and ground to ensure gear strength and reduce noise.
No need to use change gears for cutting 72 kinds of metric and inch threads, 36 kinds of MP and DP threads.
Clutch in headstock and spindle bore 130mm or 165mm for optional.

Specifications	C6260Y	C6266Y	C6280Y	C62100Y
Max. swing over bed	600mm	660mm	800mm	1000mm
Max. swing over slide	375mm	435mm	545mm	745mm
Max. swing over gap	800mm	860mm	1000mm	1200mm
Effective length of gap	280mm
Workpiece cutting length	1000/1500/2000/3000/4000mm
Bed width	400mm
Spindle hole	103mm / 130mm / 165mm
Spindle nose	ISO-D11
Spindle taper	Metric 115mm / 140mm (1:20)
Spindle speeds (Number)	(18 steps) 9-1275rpm / (12 steps) 16-816rpm
Longitudinal feeds range	(72 kinds) 0.073-4.066mm/rev (0.0028-0.16inch/rev)
Cross feeds range	(72 kinds) 0.036-2.033mm/rev (0.0014-0.08inch/rev)
Metric threads range	(72 kinds) 0. 5-112mm
Inch threads range	(72 kinds) 1/4-56TPI
Module threads range	(36 kinds) 0. 5-7MP
Pitch threads range	(36 kinds) 4-56DP
Max. travel of top slide	110mm
Max. travel of cross slide	325mm
Max. size of tool shank	32*32mm
Dia. of tailstock sleeve	90mm
Taper of tailstock sleeve	MT6
Max. travel of tailstock	150mm
Main drive motor	7.5kW		11kW
Coolant pump motor	90W
Rapid traverse motor	250W
Packing size (1000mm)	2820x1300x2100mm
Packing size (1500mm)	3320x1300x2100mm
Packing size (2000mm)	3820x1300x2100mm
Packing size (3000mm)	4820x1300x2100mm
Packing size (4000mm)	5820x1300x2100mm
N.W./G.W. (1000mm)	2900/3500kg	3000/3600kg	3150/3750kg	3450/4050kg
N.W./G.W. (1500mm)	3000/3600kg	3250/3850kg	3400/4000kg	3700/4300kg
N.W./G.W. (2000mm)	3400/4050kg	3500/4150kg	3650/4300kg	3950/4600kg
N.W./G.W. (3000mm)	3800/4450kg	3900/4550kg	4050/4700kg	4350/5000kg
N.W./G.W. (4000mm)	4200/4850kg	4300/4950kg	4450/5100kg	4750/5400kg

Standard Accessories	Optional Accessories
3 jaw chuck	Chuck guard
4 jaw chuck	Toolpost guard
Steady rest	Leadscrew guard
Follow rest	Live center
Face plate	Electromagnetic brake
Thread cutting dial	Drill chuck+drill arbor
Longitudinal touch stop	Taper turning attachment
Work lamp	Quick change tool post
Coolant system	DRO
Splash guard
Foot brake
Machine pad
Toolbox & tools
Dead center and sleeve
Oil gun