C6241,C6246

Engine Lathe

Precision ground and supersonic frequency hardened bed ways is designed in double wall structure, giving super rigidity. The spindle system is high in rigidity and accuracy. The design of the main drive is optimized and the gears in the headstock are precision ground. The noise of the machine is low.
There is no need for change gears. The machine can turn about 200 kinds of metric, whitworth, module and D.P. threads. An automatic stopping device is used to realize automatic stop for the machine of a certain length workpiece, which is safe and reliable with braking device providing quick and effective stop while operating.

Specifications	C6241	C6246
Swing over bed	410mm	460mm
Swing over cross slide	224mm	274mm
Swing over gap	640mm	690mm
Length of gap	155mm
Max. length of workpiece	1000/1500mm
Width of bed	300mm
Spindle nose	D1-6
Spindle bore	58/82mm
Taper of spindle bore	MT6
Speed steps	12
Range of spindle speed	25-2000r/min
Max. travel of compound rest	120mm
Max. travel of cross slide	290mm
Leadscrew pitch	4TPI or 6mm
Max. section of tool	25x25mm
Range of longitudinal feeds	42 kinds 0.031-1.7mm/rev
Range of cross feeds	42 kinds 0.014-0.784mm/rev
Metric threads range	41 kinds 0.1-14mm
Inch threads range	60 kinds 2-112TPI
Diametrical pitches range	50 kinds 4-112DP
Module pitches range	34 kinds 0.1-7MP
Dia. of tailstock sleeve	60mm
Travel of tailstock sleeve	120mm
Morse taper of tailstock sleeve	MT4
Power of main motor	5.5kW (7.5HP)
Power of coolant pump	90W
Packing size	2255/2755x1110x1575mm	2255/2755x1110x1575mm
N.W./G.W.	1680/1980kg 1870/2180kg	1726/1946kg 1900/2210kg

Standard Accessories	Optional Accessories
3 jaw chuck	Taper turning attachment
Change gears set	Live center
Chasing dial indicator	Working light
Reduction sleeve	Leadscrew guard
Dead center	Chuck guard
Full length splash guard	Quick change tool post
Coolant system	Drill chuck & drill arbor
Brake system	DRO
4 jaw chuck
Face plate
Steady rest
Follow rest
Toolbox & tools