TX-X6R

Tool Grinder

Corner radius end mill re-sharpener

This machine can grind end mill and round nose cutter. It is portable for fools. It can be grinding with 2 blades, 3 blades and 4 blades. Customized can also directly open the edge of the face by tungsten bars. The optional clamp set grinds a 5-blade end mill cutter.
The circular arc of the coping round nose milling cutter is R0.3, R0.5, R0.8, R1 or R0.5, R1, or R1.5, R2. If there are other specifications, the arc can be customized.

Model	TX-X6R
Grinding diameter	4-14mm (20mm)
Grinding arc	R0.3, R0.5, R0.8, R1 or R0.5, R1, or R1.5, R2
Power	AC 220V
Motor	180W/4800rpm
Grinding wheel	CBN or SDC
Dimension	41x24x30cm
N.W.	22kg

Note: Standard collet: 6 pieces.