TX-60A,TX-80A
Drill bit re-sharpener
TX-60A drill sharpening machine can sharpen various standard twist drills, flat bottom drills, center positioning drills, step drills, four-sided drills, cemented carbide drills, wood drill bits, end mills, counter-hole drills, etc.; repairable grind the flank, rake face, chisel edge, chamfer, etc. of various top angle drills.
Model | TX-60A | TX-80A |
Grinding diameter | 3-60mm | 3-80mm |
Grinding wheel diameter | 200mm | 200mm |
Motor | 550W/2800rpm | 550W/2800rpm |
Dimension | 49x39x41cm | 49x39x41cm |
N.W. | 98kg | 98kg |
| ||
16-35mm 35-60mm 60-80mm Grinding wheel dresser | ||
Recommended Products
-
CQ290V,CQ320VSwing over bed 290/320mm
Workpiece length 750/900mm
Spindle bore 38mm
Spindle speed 75-2000rpm
-
W01-2X610,W01-2X1000,W01-2X1250Working length 610-1250mm
Plate thickness 2mm
-
SP75Cutter dia. 50-125mm
-
W67YPressure force 30-400t
Table length 1320-4000mm
-
SG60120NC,SG60160NC,SG60220NCTable size 600x1250mm
Travel Z axis 600mm
-
X6323ATable size 1067/1246x230mm
Travel X axis 670/850mm
Spindle taper R8/ISO30/ISO40
Spindle motor 3HP
-
CQ6280B,CQ6280CSwing over bed 800mm
Workpiece length 2000/3000mm
Spindle bore 82/105mm
Spindle speed 9-1400rpm
-
QC12KShear thickness 4-25mm
Shear width 2500-6000mm
-
Q11-4X2000,Q11-4X2500,Q11-4X3200Shear width 2000-3200mm
Shear thickness 4mm
-
BS-280GCutting 90° (Round) 220mm
Cutting 90° (Square) 250x155mm
-
CJM280Swing over bed 280mm
Workpiece length 500/750mm
Spindle bore 38mm
Spindle speed 30-2000rpm
-
CQ6230ASwing over bed 310mm
Workpiece length 1000mm
Spindle bore 38mm
Spindle speed 65-1400rpm
-
CD6240B,CD6250B,CD6260B,CD6266BSwing over bed 410-660mm
Workpiece length 3000mm
Spindle bore 65mm
Spindle speed 22-1800rpm
-
TX-Z32Drill bit re-sharpener
Grinding diameter 3-32mm
Motor 250W
-
G9032Drilling capacity 32mm
What product are you looking for?
Feel free to check our products, it would be our pleasure if some of them happen to be just as you want them to be.
-
- WhatsApp/WeChat
- Stone Wu+8618663621683
-
Stone Wu
