WAD

Hydraulic Press Brake

Electro-hydro CNC Press Brake

CNC press brake has better bending accuracy and higher bending efficiency, and the bending times are increased by at least 30% in the same bending time.

Controller Brand: DELEM, CYBELEC, ESA


Model	Bending Force	Bending Length	Approaching Speed	Ram Speed	Return Speed	Column Distance	Throat Depth	Stroke	Open Height	Step/Servo Motor	Weight	Dimensions
Model	Bending Force	(A)	Approaching Speed	Ram Speed	Return Speed	(B)	(D)	(C)	(E)	Step/Servo Motor	Weight	Dimensions
Unit	kN	mm	mm/s	mm/s	mm/s	mm	mm	mm	mm	kW	t	LWH mm
WAD-50T/1300	500	1300	220	15.5	200	1120	300	150	460	5.5/6	4.5	180015002300
WAD-70T/1600	700	1600	220	15.5	200	1300	300	150	460	5.5/6	5.3	230016002500
WAD-70T/2500	700	2500	220	15.5	200	2050	300	150	460	5.5/6	6	310016002500
WAD-80T/2500	800	2500	220	15	185	2050	300	150	460	7.5/8.7	6.5	310016002600
WAD-110T/2500	1100	2500	220	15	195	2050	400	200	480	11/10.8	8.5	310018002600
WAD-110T/3200	1100	3200	220	15	195	2700	400	200	480	11/10.8	8.5	380018002600
WAD-110T/4000	1100	4000	220	15	195	3100	400	200	480	11/10.8	9.5	460018002600
WAD-110T/4100	1100	4100	220	15	195	3600	400	200	480	11/10.8	10	470018002700
WAD-135T/3200	1350	3200	220	12	150	2700	400	200	480	11/10.8	10	380018002700
WAD-135T/4000	1350	4000	220	12	150	3100	400	200	480	11/10.8	11	460018002700
WAD-135T/4100	1350	4100	220	12	150	3600	400	200	480	11/10.8	11	470018002700
WAD-170T/3200	1700	3200	160	12	122	2700	450	200	480	15/13.2	11.8	380020002800
WAD-170T/4000	1700	4000	160	12	122	3100	450	200	480	15/13.2	13	460020002800
WAD-170T/4100	1700	4100	160	12	122	3600	450	200	480	15/13.2	13	470020002800
WAD-220T/3200	2200	3200	160	11.5	135	2600	450	200	480	18.5/16.7	13	380022002850
WAD-220T/4000	2200	4000	160	11.5	135	3100	450	200	480	18.5/16.7	15	460022002850
WAD-250T/3200	2500	3200	100	10.5	130	2600	450	250	540	22/16.7	16.5	350020002900
WAD-250T/4000	2500	4000	100	10.5	130	3100	450	250	540	22/16.7	18.8	430021003100
WAD-250T/5000	2500	5000	100	10.5	130	3800	450	250	540	22/16.7	23	530021503150
WAD-250T/6000	2500	6000	100	10.5	130	4800	450	250	540	22/16.7	25	630021503150
WAD-300T/3200	3000	3200	80	8.5	110	2600	500	250	570	22	19.5	380022503200
WAD-300T/4000	3000	4000	80	8.5	110	3100	500	250	570	22	21	460025003400
WAD-300T/5000	3000	5000	80	8.5	110	3800	500	250	570	22	27.5	560025003400
WAD-300T/6000	3000	6000	80	8.5	110	4800	500	250	570	22	31	660025003400
WAD-400T/3200	4000	3200	80	8	80	2600	500	300	610	30	23	380027003500
WAD-400T/4000	4000	4000	80	8	80	3100	500	300	610	30	30	460027003500
WAD-400T/5000	4000	5000	80	8	80	3800	500	300	610	30	32	560027003500
WAD-400T/6000	4000	6000	80	8	80	4800	500	300	610	30	38	660027003500
WAD-500T/4000	5000	4000	80	8.5	90	3100	500	300	610	37	37	460027003500
WAD-500T/5000	5000	5000	80	8.5	90	3800	500	300	610	37	42	560027003500
WAD-500T/6000	5000	6000	80	8.5	90	4800	500	300	610	37	48	660027003600
WAD-600T/4000	6000	4000	80	8.5	85	3100	600	320	650	45	48	460033003900
WAD-600T/5000	6000	5000	80	8.5	85	3800	600	320	650	45	52	560033003900
WAD-600T/6000	6000	6000	80	8.5	85	4800	600	320	650	45	58	660033003900
WAD-600T/7000	6000	7000	80	8.5	85	5600	600	320	650	45	68	760033003900
WAD-700T/6000	7000	6000	80	8.5	85	4900	600	320	700	55	78	660035004000
WAD-800T/6000	8000	6000	80	8	90	4600	600	320	800	30*2	79	660035004000
WAD-800T/7000	8000	7000	80	8	90	5600	600	320	800	30*2		760035004200
WAD-800T/8000	8000	8000	80	8	90	6600	600	320	800	30*2		860036004500
WAD-800T/10000	8000	10000	80	8	90	7800	600	320	800	30*2		1060036004900

Feature	FIG.
Outlook Energy conservation, efficiency and environmental protection would be the trend, this is the advantage of WAD series press brakes. In the traditional press brake, the pump and motor will run continuously, but in the servo system of our WAD series press brake, as long as the plunger is at rest, the pump and main motor will be at rest. This saves a lot of energy without affecting productivity.
CNC Controller There is no doubt that it is the brain of the whole machine. We offer Delem, ESA and Cybelec brand controller, which are imported from the Netherlands, Italy and Switzerland respectively. The efficient algorithm optimizes the running cycle of bending, reduces the time required to set the work step, and makes bending more efficient, especially for batch processing. In addition, the system can meet 2D and 3D graphics editing.
Hydraulic System This is an electro-hydraulic servo synchronous hydraulic control system with short hydraulic cylinder spacing. It has strong anti eccentric load ability, high synchronization accuracy, low cost and high power density ratio. The pressure of the hydraulic system can be adjusted according to the practical use to meet the requirements of bending force. ADH adopts the well-known German brand Hawei hydraulic system, which has the characteristics of low failure rate and high efficiency.
Motor As we all know, servo motor has become the mainstream, with low energy consumption, high dynamics and improving machine production efficiency as the main goal. Compared with traditional motors, the energy consumption can be saved up to 35%, so it can bring customers the advantages of high efficiency and low operation cost. At the same time, we also have an efficient and energy-saving motor from Siemens, Germany, which can meet the daily production needs of customers, and its work efficiency is much higher than that of ordinary motors.
Oil Pump The oil pump is made of high-strength cast iron, with unique internal noise reduction design, low sensitivity to oil pollution and long service life.
Backgauge We use imported ball screw and linear guide rail to ensure that the movement accuracy of X-axis is higher than that of screw rod. The rear stop adopts synchronous pulley mechanism controlled by servo motor instead of stepping motor. The whole backgauge system is tempered at high temperature, which is conducive to completely eliminate the internal stress, improve the plasticity and toughness of the metal, and make you no longer suffer from any loss of accuracy caused by frame deformation.
Electrical Parts It adopts genuine Schneider pieces imported from France, which is stable and durable with long service life; Equipped with Estun original adaptive electrical box assembly, with strong anti-interference ability and stable electrical operation.
Crowning Independent design, calculate the compensation value according to the total deformation of the ram and worktable, so as to make the deformation curve of the bed fit perfectly with the compensation curve, and better ensure the consistency of product straightness and angle.
Punches & Dies Press brake punches and dies will be one of the most important topics we discuss before you place the order. Any bending shape will be completed by a suitable set of punch and die. We can provide appropriate tools according to different bending requirements of customers.
Fast Clamp Quickly change the top punch to save time
Ball Screw & Guide Ball screw and linear guide rail are adopted to ensure the smooth operation of the machine.
Servo Motor The servo motor controls the Y-axis moving with higher accuracy.