W12-10X4000

Plate Rolling Machine

4 roller hydraulic plate rolling machine

Easy and simple operation, diversified rolling methods.
CNC control, digital display of the displacement of each working roll, high precision of rolling and good roundness.
Full hydraulic drive, high efficiency and energy saving, driving power equivalent to 60% of traditional.
Rolling round in one go, productivity 50%-80% higher than that of three-roller rollers.
Convenient and accurate material alignment, avoiding wrong edges.
Self-contained cone device for easy rolling of cones.
Permanent lubrication technology (the shaft does not need to be refuelled as it goes through its life).
The plate is always clamped by the upper and lower rolls during the rolling process, without slipping.
The possibility of rolling cylinders with 1.1 times the diameter of the upper rolls, with smaller straight edge. Lengths when the plate end is pre-bent than on other types of coilers.
Ease of adding handling devices, feeding devices, palletizing devices.

Model	Plate thickness	Pre-bending thickness	Roller length	Plate yield limit	Upper roller diameter	Bottom roller diameter	Side roller diameter	Main motor
Model	mm	mm	mm	MPa	mm	mm	mm	kW
W12-4X2000	4	3.5	2050	245	160	140	120	3
W12-6X2000	6	5	2050	245	190	170	150	4
W12-8X2000	8	6.5	2050	245	210	190	170	5.5
W12-10X2000	10	8	2050	245	230	210	190	7.5
W12-12X2000	12	10	2050	245	270	250	210	11
W12-16X2000	16	13	2050	245	300	270	220	11
W12-20X2000	20	16	2050	245	330	300	240	11
W12-25X2000	25	20	2050	245	360	330	250	15
W12-30X2000	30	25	2050	245	390	360	300	18.5
W12-35X2000	35	28	2050	245	430	390	330	22
W12-40X2000	40	32	2050	245	460	420	360	30
W12-45X2000	45	36	2050	245	510	460	390	37
W12-50X2000	50	40	2050	245	550	510	420	45
W12-4X2500	4	3.5	2550	245	190	170	150	4
W12-6X2500	6	5	2550	245	210	190	170	5.5
W12-8X2500	8	6.5	2550	245	230	210	190	7.5
W12-10X2500	10	8	2550	245	270	250	210	11
W12-12X2500	12	10	2550	245	300	270	220	11
W12-16X2500	16	13	2550	245	330	300	240	11
W12-20X2500	20	16	2550	245	360	330	250	15
W12-25X2500	25	20	2550	245	390	360	300	18.5
W12-30X2500	30	25	2550	245	430	390	330	22
W12-35X2500	35	28	2550	245	460	420	360	30
W12-40X2500	40	32	2550	245	510	460	390	37
W12-45X2500	45	36	2550	245	550	510	420	45
W12-4X3000	4	3.5	3100	245	210	190	170	5.5
W12-6X3000	6	5	3100	245	230	210	190	7.5
W12-8X3000	8	6.5	3100	245	270	250	210	11
W12-10X3000	10	8	3100	245	300	270	220	11
W12-12X3000	12	10	3100	245	330	300	240	11
W12-16X3000	16	13	3100	245	360	330	250	15
W12-20X3000	20	16	3100	245	390	360	300	18.5
W12-25X3000	25	20	3100	245	430	390	330	22
W12-30X3000	30	25	3100	245	460	420	360	30
W12-35X3000	35	28	3100	245	510	460	390	37
W12-40X3000	40	32	3100	245	550	510	420	45
W12-50X3000	50	40	3100	245	610	560	480	55
W12-60X3000	60	48	3100	245	670	620	520	75

Standard Accessories	Optional Accessories
Movable control panel	Top support rack for big diameter
Hardened rolls	Lateral support rack for big diameter
Digital read out for both rolls	Ground and polished rolls for special job
Hydraulic station	Safety cable
Hydraulic motor	Fan cooled or water cooled
Hydraulic drop end
Cone bending device