Aseismatic capability, high strength and good quality cast iron.
Main motor and spindle driven through wide-angle belt.
Taiwan high precision linear guide ways.
Ball screw pre-extended structure to reduce the heat-deformation and improve the precision and rigidity.
Adopting Japan NSK special screws angular contact ball bearing group.
MODEL | KDCK-25A |
CAPACITY | |
Max. swing over bed | 500mm |
Max. cutting diameter for disc parts | 300mm |
Max. cutting diameter for axle parts | 250mm |
Max. length of workpiece | 400mm |
TRAVEL | |
Max. cross travel (X) | 180mm |
Max. longitudinal travel (Z) | 500mm |
FEED | |
Rapid feed for axis X | 12m/min |
Rapid feed for axis Z | 20m/min |
SPINDLE | |
Max. speed of spindle | 5000rpm (spindle sleeve) |
Spindle nose | A2-6 |
Spindle bore | 62mm |
Type of spindle motor | Servo motor |
Spindle motor power | 7.5/11kW |
Hydraulic chuck | 8″ |
TOOL POST | |
Tool number | 8 |
Outside diameter of cutting tool shank | 25x25mm |
Inner dia. of cutting tool shank | 40mm |
TAILSTOCK | |
Tailstock sleeve dia. | 63mm |
Tailstock sleeve travel | 115mm |
Taper hole of tailstock quill | MT4 |
OTHERS | |
Repeatability | 0.005/0.006mm |
Surface roughness | ≤Ra0.8μm (Nonferrous) |
Capacity for coolant | 150L |
Min. input | 0.001mm |
Bed structure | 30° slant bed |
Standard Accessories | |
CNC system | Coolant pump |
Motor of X axis | Main electrical component |
Motor of Z axis | Lubrication system |
Main motor | Hydraulic system |
Spindle bearing | Totally sealed guard |
Ball screw of X/Z | Circle toolpost base |
Linear guide of X/Z | Tool post clamp gib |
Tool post | Square tool post base |
Solid 3 jaw hydraulic chuck | Tool box |
Solid oil cylinder | |
Optional Accessories | |
Automatic conveyor |
Recommended Products
Swing over bed 500mm
Workpiece length 500mm
Cutting off machine
Grinding diameter 4-14mm
Motor 180W
Swing over bed 630-800mm
Spindle bore 130-225mm
Swing over bed 400-500mm
Workpiece length 500-750mm
Travel X/Y/Z axis 800/550/550mm
Worktable size 1000x550mm
Drill bit re-sharpener
Grinding diameter 4-14mm
Motor 120W
Cutting 90° (Round) 220mm
Cutting 90° (Square) 250x155mm
MT1-4
Max. speed 5000rpm
Swing over bed 400mm
Workpiece length 1000mm
Boring diameter 260mm
Spindle speed 200rpm
Table size 305x1020mm
Travel X axis 1130mm
Travel X/Y/Z axis 650/400/500mm
Worktable size 850x400mm
Swing over bed 630/800mm
Workpiece length 4000mm
Spindle bore 105mm
Spindle speed 7.5-1000rpm
3 roller hydraulic arc adjust plate rolling machine
Working length 2000-4000mm
Plate thickness 4-35mm
Pressure force 0.5-5t
What product are you looking for?
Feel free to check our products, it would be our pleasure if some of them happen to be just as you want them to be.
Here We Are
Qingzhou Shengmao Machinery Co., Ltd.
South Hedong Village,
Yidu Subdistrict, Qingzhou City, Shandong Province, China 262500
© 2024 Qingzhou Shengmao Machinery Co., Ltd. All rights reserved