CW61125,CW61140,CW61160

Heavy Duty Lathe

Ordinary heavy duty 10T manual machine

This series of machine are mainly used to undertake all kinds of turning work, it can turn all kinds of parts of the end, cylindrical, bore and metric thread, inch thread, modulus thread, diameter thread. Can be used on the turret to cut the taper alone, but also can be used on the knife with the vertical feed with the long taper motor. In addition can also bear the drilling, nesting, boring and other processes. The machine power, rigidity, and can use carbide cutting tools for thread cutting, to process a variety of ferrous metals and non-ferrous metals.

CW61125 / 10T is a base type product with a maximum turning diameter of 1250mm.
CW61140 / 10T is the base type heightening products, the maximum diameter of the bed is 1400mm.
CW61160 / 10T is a high size, the maximum diameter of the bed diameter of 1600mm.

Specifications	CW61125	CW61140	CW61160
CAPACITY
Swing over bed	1250mm	1400mm	1600mm
Swing over carriage	865mm	1010mm	1210mm
Max. length of workpiece	3000 4000 5000 6000 8000 10000 12000mm
Max. turning length	2800 3800 4800 5800 7800 9800 11800mm
Pan of guideway	970mm
Max. cutting force	45000N
Max. weight of workpiece	10000kg
SPINDLE
Dia. of spindle hole	130mm
Taper hole of spindle	Metric 140mm
Range of spindle speeds	Forward:3.15~315r/min; Reverse:3.5~291r/min
No. of spindle speeds	Forward:21; Reverse:12
FEED
Longitudinal and cross	56
Range of feed motion	Longitudinal:0.1~12mm Cross:0.05~6mm; Top slide:0.025~3mm
No. and range of metric thread	44; 1~120mm
No. and range of inch thread	31; 28~1/4"
No. and range of module thread	45; 0.5~60mm
No. and range of dia. thread	38; 1/2~56DP
TURRET
Max. travel of cross slide	650mm
Max. travel of top slide	300mm
Section of tool shank	45mm (260x260)
Tool post swing range	±90°
Rapid of tool post	Longitudinal:3740mm/min; Cross:1870mm/min; Top slide:935mm/min
Max. travel of tool post	2900 3900 4900 5900 7900 9900 11900mm
TAILSTOCK
Dia. of tailstock	220mm
Travel of tailstock quill	300mm
Taper hole of tailstock quill	MT6
OTHERS
Main motor power	22kW
Length	6020 7020 8020 9020 11020 13020 15020mm
Width	1995mm
Height	2175 2325 2525mm

This series of machines are mainly used to undertake all kinds of turning work, it can turn various parts of the end face, external circle, internal hole and metric threads, imperial threads, modulus threads, diameter section threads, etc.. The upper tool holder can be used for motorised turning of short tapers alone, but also for motorised turning of long tapers in conjunction with the longitudinal feed. In addition it can also undertake processes such as drilling, nesting and boring. The machine has high power and rigidity and can be used for thread cutting with carbide tools to machine various ferrous and non-ferrous metals.

Standard Accessories	Optional Accessories
4 jaw chuck Ø1250mm	Special size 4 jaw chuck
Steady rest (240-700mm)	MT6 live center
MT6 lathe dead center	Install bracket
Coolant system
Working light
Anchor bolts
Manual tailstock