CS6240,CS6250,CS6266

Engine Lathe

Can perform internal and external turning, taper turning, end facing, and other rotary parts turning.
Threading Inch, Metric, Module and DP.
Perform drilling, boring and groove broaching.
Respectively with through-hole spindle bore, that can hold bar stocks in larger diameters.
Both Inch and Metric system are used on these series lathes, it's easy for people from different measuring systems countries.
There are hand brake and foot brake for users to choose.

Specifications	CS6140	CS6150	CS6166	CS6150C	CS6166C
	CS6240	CS6250	CS6266	CS6250C	CS6266C
		CS6150B	CS6166B
		CS6250B	CS6266B
Capacity
Swing dia. over bed	400mm	500mm	660mm	500mm	660mm
Swing dia. over cross slide	220mm	300mm	420mm	300mm	420mm
Max. swing dia. over gap	630mm	710mm	870mm	710mm	870mm
Effective length in gap	240mm (Gap-bed Lathe)
Max. workpiece length	1000/1500/2000/3000mm
Max. turning length	950/1450/1950/2950mm
Guideway width	390mm
Headstock
Spindle nose	ISO702/III No.6 Bayonet lock; B/C Series: ISO702/II NO.8 Camlock
Spindle through hole dia.	52mm; B series 82mm; C series 105mm
Taper of spindle bore	Morse taper No.6; B series 90mm, 1:20; C series 113mm, 1:20
Spindle speeds	9-1600rpm, 24 steps; C series 30-1600rpm, 12 steps
Feeds and threads
Max. travel of compound rest	145mm
Max. travel of cross slide	320mm	320mm	310mm	320mm	310mm
Z-axis leadscrew pitch	12mm or 2TPI
Section of tool	25x25mm (1x1")
X-axis feed rate	1.9m/min, 50Hz; 2.3m/min, 60Hz
Z-axis feed rate	4.5m/min, 50Hz; 5.4m/min, 60Hz
X-axis feeds	0.012-2.37mm/rev, 93kinds; C series 0.027-1.07mm/rev, 65kinds
Z-axis feeds	0.028-6.43mm/rev, 93kinds; C series 0.063-2.52mm/rev, 65kinds
Metric threads	0.5-224mm, 48 kinds; C series 1-14 mm, 22 kinds
Inch threads	72-1/8TPI, 48 kinds; C series 20-2TPI, 25 kinds
Module threads	0.5-112πmm, 42 kinds; C series 0.5-7πmm, 18 kinds
Diametric pitch threads	56-1/4DP, 45 kinds; C series 56-4DP, 24 kinds
Tailstock
Dia. of tailstock sleeve	75mm
Taper of tailstock sleeve	Morse taper No.5
Travel of tailstock sleeve	150mm
Cross adjustment	±15mm
Motor
Main motor	7.5kW (10HP)
Rapid traverse motor	300-370W (1/2HP)
Coolant pump motor	120W (1/6HP)
Available voltage / cycle	220V, 380V, 400V, 420V, 440V, 575V, 600V / 50Hz or 60Hz / 3Ph
Dimension and weight
Overall dimension (LxWxH)	263 / 313 / 363 / 463 x 100 x 127/ 135 / 145cm
Packing size (LxWxH)	280 / 330 / 380 / 480 x 115 x 190cm
Net weight	2200/2400/2600/3000kg		2300/2500/2700/3100kg
Gross weight	2400/2600/2900/3400kg		2500/2700/3000/3500kg

Standard Accessories	Optional Accessories
3 jaw chuck	Leadscrew guard
4 jaw chuck	Chuck guard
Face plate	Taper turning attachment
Steady rest	Drill chuck+drill arbor
Follow rest	Live center
Coolant system	Quick change tool post
Brake system	DRO
Working light
Localizer
Toolbox & tools