CQ6232D,CQ6236D

Bench Lathe

No change gear in tool box.
Precision ground and hardened bedways.
Headstock gears are made of high quality steel, ground and hardened.
With door and drawer on foot stand for optional.
Φ51mm spindle bore for optional.
Variable speed model for optional.

Specifications	CQ6232D	CQ6236D
Swing over bed	330mm	360mm
Swing over cross slide	198mm	224mm
Swing over gap	476mm	502mm
Length in gap	210mm	210mm
Center height	166mm	179mm
Distance between centers	750/1000mm	750/1000mm
Spindle bore	38/51mm	38/51mm
Spindle nose	D1-4 of D1-5	D1-4 of D1-5
Taper of spindle bore	MT5	MT5
Speed steps	8	8
Spindle speed	70-2000rpm	70-2000rpm
Cross slide travel	170mm	170mm
Compound rest travel	95mm	95mm
Lead screw thread	8TPI or 3mm	8TPI or 3mm
Feed rod diameter	19mm	19mm
Max. section of tool	16mmx16mm	16mmx16mm
Threads imperial pitches	42 Nos. 4-112TPI	42 Nos. 4-112TPI
Threads metric pitches	44 Nos. 0.1-7mm	44 Nos. 0.1-7mm
Threads diametral pitches	25 Nos. 16-112DP	25 Nos. 16-112DP
Threads module pitches	34 Nos. 0.1-1.75MP	34 Nos. 0.1-1.75MP
Longitudinal feed imperial	24 Nos. 0.00168-0.1175"/rev	24 Nos. 0.00168-0.1175"/rev
Longitudinal feed metric	24 Nos. 0.046-3.249mm/rev	24 Nos. 0.046-3.249mm/rev
Cross feed imperial	32 Nos. 0.00046-0.03231"/rev	32 Nos. 0.00046-0.03231"/rev
Cross feed metric	24 Nos. 0.01-0.703mm/rev	24 Nos. 0.01-0.703mm/rev
Quill diameter	32/42mm	32/42mm
Quill travel	100mm	100mm
Quill taper	MT3	MT3
Main motor power	1.5kW (2HP)	1.5kW (2HP)
Coolant pump power	0.04kW	0.04kW
N.W./G.W.	510/630kg (750mm)	510/630kg (750mm)
N.W./G.W.	540/645kg (1000mm)	540/645kg (1000mm)
Packing size (LxWxH)	168x76x158cm (750mm)	168x76x158cm (750mm)
Packing size (LxWxH)	193x76x153cm (1000mm)	193x76x153cm (1000mm)

Standard Accessories	Optional Accessories
3 jaw chuck	4 jaw chuck
Dead center	Follow rest
Toolbox & tools	Steady rest
Splash guard	Face plate
Chip tray	Drive plate
Threading chasing dial	Live center
	Coolant system
	Brake
	Stopper
	Leadscrew guard
	Chuck guard
	Tool post guard
	Drill chuck & drill arbor
	Quick change tool post
	Taper turning attachment
	DRO
	Stand