CQ6230D,CQ6230DV

Bench Lathe

Precision ground and hardened bedways.
Headstock gears are made of high quality steel, ground and hardened.
Two speed motor for optional.
With door and drawer on foot stand for optional.
Circular appearance for optional.

Specifications	CQ6230D	CQ6230DV
Swing over bed	300mm	300mm
Swing over cross slide	178mm	178mm
Swing over gap	430mm	430mm
Distance between centers	714/914mm	914mm
Length of turning	560/760mm	760mm
Spindle bore	38mm	38mm
Taper of spindle bore	MT5	MT5
Speed steps	9	Variable
Spindle speed	75-1400rpm	60-2200rpm
Metric threads range (26 kinds)	0.4-7mm	0.4-7mm
Inch threads range (34 kinds)	4-56TPI	4-56TPI
Pitches of three feed leadscrews	3mm or 8TPI	3mm or 8TPI
Longitudinal feed metric	0.052-1.392mm/rev	0.052-1.392mm/rev
Cross feed metric	0.014-0.38mm/rev	0.014-0.38mm/rev
Saddle longitudinal travel	600/800mm	800mm
Cross slide travel	160mm	160mm
Top slide travel	85mm	85mm
Quill travel	95mm	95mm
Quill taper	MT3	MT3
Main motor power	1.1kW (1.5HP)	1.1kW (1.5HP)
Motor frequency	60Hz or 50Hz	60Hz or 50Hz
N.W./G.W.	480/550kg	550kg
Packing size (LxWxH)	148/168x75x142cm	168x75x142cm

Standard Accessories	Optional Accessories
3 jaw chuck	4 jaw chuck
Dead center	Follow rest
Toolbox & tools	Steady rest
Splash guard	Face plate
Chip tray	Drive plate
Threading chasing dial	Live center
	Coolant system
	Brake
	Stopper
	Leadscrew guard
	Chuck guard
	Tool post guard
	Drill chuck & drill arbor
	Quick change tool post
	Taper turning attachment
	DRO
	Stand