TX-S20
Drill bit re-sharpener
This machine is portable, accurate and durable, equipped with diamond grinding wheel made in Taiwan.
It can sharpen the tip angle (apex angle), front cutting edge (positive rake angle) and chip flute (rear angle) of the drill bit. It can replace the center drill for more accurate positioning, easier chip evacuation and easier drilling.
For three-slope drill bits, internal cooling drills, powder metallurgy drills, etc.
Model | TX-S20 |
Grinding diameter | 3-20mm |
Point angle | 118°-140° |
Power | AC 220V |
Motor | 180W/4800rpm |
Grinding wheel | CBN or SDC |
Dimension | 43x22x21cm |
N.W. | 17kg |
| |
Note: Standard collet: 18 pieces; standard wheel: CBN. | |
It is not easy to align below 3mm. | |
Recommended Products
-
BC6063Planing length 630mm
Worktable size 630x400mm
-
LV-75Jaw opening 75-218mm
-
CKM6-30
-
S0,S1,S1X,S2,S2T,S3,S3X,S4Lathe swing 228-762mm
-
M,AR-AP,A,BR-BP,B,C,DLathe swing 180-1200mm
-
XH716D,XH717DTravel X/Y/Z axis 1200/650/650mm
Worktable size 1400x600mm
-
251-100,251-111,251-200,251-222,251-300,251-333,251-400,251-444,251-555Lathe swing 12"-48"
-
TOOA0,TOOA1,TOOE5,TOOB2,TOOC3,TOOD1,TOOD2Lathe swing 120-1500mm
-
TK22A Front Mount4 Jaw self centring chuck with 2-piece jaw front mount
-
TK22 Front Mount4 Jaw self centring chuck with solid jaw front mount
-
TK21A Front Mount3 Jaw self centring chuck with 2-piece jaw front mount
-
TK21 Front Mount3 Jaw self centring chuck with solid jaw front mount
-
K72 Direct Mount4 Jaw independent chuck with solid jaw direct mount
-
K724 Jaw independent chuck with solid jaw
-
SER1Pc
What product are you looking for?
Feel free to check our products, it would be our pleasure if some of them happen to be just as you want them to be.
-
- WhatsApp/WeChat
- Stone Wu+8618663621683
-
Stone Wu
