TX-13T,TX-13Q
Step drill re-sharpener
The 13T type can be cutter sharpening the step drill. The13Q type can be cutter sharpening thin plate drills. It is equipped with the Taiwanese master's manufacturing diamond grinding wheel with precise angle, long life, cost saving and high use efficiency.
Model | TX-13T/13Q |
Grinding diameter | 4-14mm |
Point angle | 90°-130° |
Power | AC 220V |
Motor | 180W/4800rpm |
Grinding wheel | CBN or SDC |
Dimension | 35x23x27cm |
N.W. | 12kg |
| |
Note: Standard collet: 11 pieces. | |
Recommended Products
-
CJ0618Swing over bed 180mm
Workpiece length 350mm
Spindle bore 21mm
Spindle speed 50-2250rpm
-
Q11Shear thickness 4-6mm
Shear width 2000-3200mm
-
QC11YShear thickness 4-20mm
Shear width 2000-2500mm
-
Q11-6X2000,Q11-6X2500,Q11-8X2000,Q11-8X2500,Q11-10X1000,Q11-10X1500Shear width 1000-2500mm
Shear thickness 6/8/10mm
-
Q11Shear thickness 3-3.5mm
Shear width 1200-1500mm
-
QC12YShear thickness 4-32mm
Shear width 2000-6000mm
-
QC12YShear thickness 4-30mm
Shear width 1500-6000mm
-
WC67YPressure force 40-600t
Table length 2000-6000mm
-
CK40L,CK50LSwing over bed 400-500mm
Workpiece length 500-750mm
-
KCY-65/2WD,KCY-85/3WDDrilling capacity 65/85mm
Tapping size M20/M24
Max. attraction 15800/16800N
-
ESR-1300X2.5,ESR-1300X4.5,ESR-1550X3.5,ESR-2020X3.5,ESR-1300X6.5,ESR-2070X2.5,ESR-2070X3.5,ESR-2500X0.8Working length 1300-2500mm
Plate thickness 0.8-6.5mm
-
SGA3063AH,SGA3063AHR,SGA3063AHDTable size 305x635mm
Travel X axis 765mm
-
LTT-50Boring diameter 260mm
Spindle speed 200rpm
-
WM210V-GSwing over bed 210mm
Workpiece length 400mm
Spindle bore 21mm
Spindle speed 50-2500rpm
-
W67YPressure force 30-400t
Table length 1320-4000mm
What product are you looking for?
Feel free to check our products, it would be our pleasure if some of them happen to be just as you want them to be.
-
- WhatsApp/WeChat
- Stone Wu+8618663621683
-
Stone Wu
